NZXT CA-H510i-W1 H510i Mid-Tower USB 3.5" / 2.5" mITX / mATX / ATX Matte White Case
$121.07
Was: $145.28
Availability:
In Stock
Richmond BC Warehouse:
Toronto ON Warehouse:
Product Code:
14308
Brand:
NZXT
Mfg Sku:
CA-H510I-W1
Share to:
Specification
NZXT CA-H510i-W1 H510i Mid-Tower USB 3.5" / 2.5" mITX / mATX / ATX Matte White Case
Detail Specifications
| Material(s) SGCC Steel and Tempered Glass |
| Motherboard Support Mini-ITX, MicroATX, and ATX |
| Front I/O Ports 1x USB 3.1 Gen 2 Type-C 1x USB 3.1 Gen 1 Type-A 1x Headset audio Jack Front I/O internal header 1x USB 3.1 Gen 2 Internal Header 1x USB 3.1 Gen 1 Internal Header 1x USB 2.0 Internal Header 1x HD Audio Header |
| Filters All Air Intakes |
| Smart Device V2 3x Fan channels with Max 10W per channel output 2x RGB LED port support up to 4x HUE 2 addressable LED strips or 5x Aer RGB or Aer RGB 2 fans Built-in noise detection module (Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.) |
| LED Strip(s) 2 integrated addressable LED strip |
| Vertical GPU Mount 2 Slots |
| Included Accessories Installation screws 10x Cable ties 1x Headset Audio Jack splitter (4 pole to 3 pole) |
| Drive Bays 2.5": 2+1 3.5": 2+1 |
| Expansion Slots 7 |
| Radiator Support Front: 2x 140 or 2x 120mm with Pull Rear: 1x 120mm |
| Fan Support Front: 2 x 120/ 2 x 140mm Top: 1x 120mm/ 1x 140mm (1 Aer F120 Case Version included) Rear: 1x 120mm (1 Aer F120 Case Version included) |
| Fan Specs Aer F120 (Case Version) Speed: 1200 +/- 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing |
| Clearance Cable Management: 19-23mm GPU Clearance: Up to 381mm w/o front watercooler installed, up to 325mm with front watercooler installed Vertical GPU Mount Clearance: 40.64mm CPU Cooler: Up to 165mm Front Radiator: 60mm Rear Radiator: 60mm Reservoir and Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel) |
| Item Dimension (L"xW"xH") 21 x 11 x 20 Weight 34.00 LB Warranty Information 2 years Manufacture |